High Density Racking

Store More with the Maxipacker System

Take your storage density to a higher level

If you need to store multiple pallets of a single SKU or many pallets going to the same destination, there may be no better way than the Maxipacker storage system.

Here are the Pros and Cons of this High Density system.

Pros:

• Almost perfect density - no aisles required.
• Eliminates crushing and leaning - full clear height can be used with no height restriction from forklift overall collapsed height of mast.
• Price per pallet stored is the lowest possible
• No honeycombing
• No rack damage - truck does not enter the rack
• Very reliable - the shuttles are very simple and require very little maintenance.
• Very fast, pallet transactions are seamless
• Density is 90% or greater
• Pallet storage is dynamic. Pallets are conveyed in the FIFO system from inbound (manufacturing) to outbound (shipping) without the use of forklift trucks.
• Due to storage density, multiple warehouses can be consolidated into single warehouse.
• Companies save money by turning off the lighting over the racking.  Only the inbound and the out bound sides need lighting.  Warehouse is, as a result, cooler and less expensive to run.

Cons:

• Pallets must be of good construction
• Pallet dimensions and product dimensions must be similar - multiple sized pallets cannot be stored in the same lane.
• Selectivity is reduced. Ideally, pallets need to be of same SKU or lot or shipping destination